Sizing your photovoltaic panel body.

Determine the ideal measurements of sunlight PV body to match your residence.

Needed to have to understand.

To size your photovoltaic panel body you need to have to exercise the amount of power you make use of and also when you utilize it A 5kW body suffices for many residences, yet go larger if you may The variety of boards is actually unnecessary, it concerns the body’s general capability.

If you are actually considering going sunlight, at that point you need to have to understand what measurements planetary system you’ll need to have to operate your residence (as long as sensibly achievable) on renewable energy.

The measurements or even capability of a sun photo-voltaic (PV) body is actually the optimum power outcome the body may supply. Yet allow’s crystal clear one thing up: this isn’t regarding the variety of photovoltaic panels, it concerns the general capability of the body.

Your body may possess 20x330W boards, or even 24x275W boards – in either instance, it is actually a 6600W (6.6kW) body which’s the number that really matters.

Estimate my solar system.

Find out how much a solar system might cost you and what you’ll save.

Understanding your electricity usage.

You can’t correctly size your solar PV system unless you know how much electricity your home uses now (and how much you might be using in the future). The easiest way to figure this out is to look at past electricity bills, which should tell you how much power you’ve used in the previous month or quarter. From this you can figure out the average daily usage. This is even easier if you have a smart meter installed – you should be able to see your daily usage either on the bill or by checking your account online.

Your power consumption is measured and billed in kilowatt-hours (kWh).

A typical Australian home uses 15–20kWh per day. But households can vary considerably in their electricity consumption, depending on the number of people living there, the area they live in, whether they use gas for cooking or hot water, and many other factors. For example, a single-person home will typically use about 8–12kWh per day on average, while a household of five people with a pool could use 30–40kWh per day.

Time of day and seasonal usage.

It is actually important to consider when you use electricity. Is your home generally empty during weekdays, with everyone at work or school, so that your main power consumption comes in the evening? If so, your solar panels might not be used most effectively, as it’s better to use the generated power during the day (or use it to charge a storage battery) than export it to the grid.

Also consider whether some days are more power-hungry that others – the weekend for instance, when everyone is at home. And do you use more power in summer (running air conditioners) or in winter (running heaters)?

Put all this together and you should have a good understanding of how much power you usually use each day, how much you use on peak days, and the times of day you use the most power.

Future usage.

Your solar PV system is hopefully going to be on your roof for many years to come, so you want to try to anticipate how much electricity you’ll likely need in the future too. Some future needs to consider are:

working from home more often, and therefore using more electricity at home planning to start a family adding a swimming pool (pool pumps can use a lot of power) switching from gas hot water and cooking to electric (a good idea in any case if you’re getting solar) getting an electric car improving the home’s resale value.

Don’t worry, you don’t need a crystal ball for this. The simple solution is to put on as big a system as you can reasonably afford right now, as we discuss further down. And it can be possible in many cases to upgrade or expand your solar PV system in the future.

Calculating the size of your solar PV system.

Now you know how much power you typically use and the times of day you use it. What capacity will your solar PV system need to be to cover your power usage?

First, we’re assuming you’ll have a grid-connected system. This is by far the most common type and it simply means you have solar panels generating electricity during the day, and a grid connection to supply electricity when the solar panels aren’t generating enough (at night, for example). See grid-connected vs off-grid for more.

How much electricity can you expect per kW of solar panels?

Solar PV systems are rated in watts (W) or kilowatts (kW). You’ll see systems described as 4kW, 5kW, 10kW and so on. (See terminology for the difference between a kilowatt – how the solar PV system is rated – and a kilowatt-hour, the unit by which your consumption is measured and billed.)

1kW of solar panels = 4kWh of electricity produced per day (roughly).

For each kW of solar panels, you can expect about 4kWh per day of electricity generation. So a 6.6kW planetary system will generate about 26.4kWh on a good day (which means plenty of sunshine but not too hot).

It’s just a general rule – the actual amount of electricity generated per kW of solar panels depends on your location, the time of year and the amount of sunlight you’re getting, the quality of the system, the orientation of the panels, how old they are, and so on. In southern regions such as Hobart it could be as low as 3.5kWh per day, while the same 1kW of panels in Darwin could generate 5kWh.

How big should your solar PV system be?

Looking for solar panels?

We’ve tested to find you the best.

Your minimum aim is to cover as much of your household consumption as reasonably possible for a typical day. If your power consumption is (say) 30kWh on some days, but on most days it’s 20kWh, it might not be worth adding extra panels just to cover those few 30kWh days. You could go with a 5kW solar PV system and just accept paying for more power than usual from the grid on those occasional high-consumption days.

But solar panels are relatively cheap now, and there’s an economy of scale in installing a larger system, so it’s worth talking this through with your installer to consider how big a system you could get. Typical solar PV systems installed in 2021 are at least 6.6kW in size and we think that’s a good size for most homes to aim for right now.

That said, bigger systems of 8–10kW are becoming more common, especially for systems that include a storage battery.

You might think it’s better to oversize your system because any excess will be exported to the grid, and you’ll be paid for it via the feed-in tariff. But the feed-in tariff for new solar PV systems is generally very low – typically from four to eight cents per kWh, though you can get better deals from some energy retailers – and it’s unlikely on its own to justify the cost of a larger system.

The real benefit of a larger system is that it will be easier to add a battery, take full advantage of your inverter’s capacity, and simply to generate more power throughout the day so that you are less likely to need grid power. And the excess power that you’re sending into the grid will mean there’s more solar-sourced electricity in the system for other homes to use.

Power usage shifting.

Since you’re looking at saving on power costs by installing solar, it makes sense to maximise your use of that solar power. So as much possible, your electricity consumption should happen during the day when the panels are generating. Likewise, minimise your power consumption at night. Night-time power is going to come from the grid – which is relatively expensive. Alternatively, night-time usage will come from your storage battery if you have one, and you won’t want to drain that any faster than you need to.

So consider running your dishwasher and washing machine during the daytime, using a timer or "delay start" function if they have one. Likewise, try to use air conditioners and heaters during daylight, and again consider using timer functions – this can reduce the amount you need to run them during the evening.

Online calculators.

Online "solar calculators" can help you work out the size of solar system you need. And while we don’t endorse any in particular, they’re worth a look. However, some solar calculators focus on aspects other than system sizing, such as payback times, cost of finance and so on – all potentially useful but it might not be the information you’re looking for.

Grid-connected vs off-grid.

Grid-connected.

By far the most common type in Australia, these systems have solar panels and an inverter, and are connected to the main electricity grid. The solar panels supply power during the day, and the home generally uses the solar power first before resorting to electricity from the grid. The grid connection is used to supply power at night (assuming there’s no storage battery connected) and at other times when the solar panels can’t generate enough power, such as on low-sunlight days.

Off-grid.

This type of system is completely standalone from the main grid. All the home’s power comes from solar panels, and possibly some other types of power generation as well, such as wind. These systems almost always use storage batteries to capture unused power from the solar array, for use at night and on low-sunlight days. They often also have a diesel-powered generator for back-up in extended periods of low sunlight and when there’s a sudden high demand for power (such as when a pump starts up).

Off-grid systems are usually more complex and expensive than grid-connected systems. They need more solar capacity than a typical grid-connected system, and may also need inverters capable of higher loads to cope with peak demands. Homes that run off-grid need to be particularly energy-efficient and the load demand needs to be well-managed throughout the day.

Off-grid systems generally only make sense for remote properties where a grid connection isn’t available or would be prohibitively expensive to install. They should be designed and installed by a supplier with particular expertise in this type of system.

Installation considerations.

Roof space.

Most freestanding houses will have enough roof area to support however many panels the home needs. Factors that might reduce your available roof area include heavily shaded sections and roofs with unusual pitch. Solar panels are mounted on brackets to ensure correct angling and air circulation, so installers can usually find a way to make most roof spaces work well.

Orientation.

It’s usually best to have the panels facing north, to maximise the amount of sunlight that falls on them. But that’s not always possible and it’s not essential. North-east or north-west are often just as good. Your installer should be able to work out the best orientation for your panels given your location, roof space and household needs.

Sometimes a mix of east- and west-facing panels can work best – this may give a slightly lower amount of power generation in the middle of the day, but will produce more in the morning and late afternoon compared to a north-facing array. If you tend to use more power at those times, this orientation might make more sense.

And don’t despair if your only available roof space faces south – south-facing panels can still produce about 80% of their rated power.

Plus, if you already have north-facing panels, you can always expand your solar PV, or add a separate system, on the southerly aspect. Solar panels are cheap enough that this can make economic sense, but you may want to put on a few more panels in the south-facing array to make up for the reduced production.

Talk to installers.

It’s not always easy to calculate exactly the amount of capacity you’ll need for your solar panels, or how much you’ll actually be able to fit on your roof. So while this article will help you do your homework, in the end you should still talk to at least a couple of solar installers to get a detailed quote.

A good installer will work with you to figure out your home’s power usage and also the right sort of solar system to suit both your power needs and the roof space you have available.

Inverters.

The inverter is a key part of the solar PV system – it’s the box on the wall (or sometimes the roof) that takes the power generated by the solar panels in direct current (DC) and converts it to alternating current (AC) for your household circuits to use in powering your fridge, TV, lights and so on.

The inverter size must match the solar PV array’s size. Basically, if you have 5kW of panels on the roof, you’ll need a 5kW inverter as well. But note that the panels rarely if ever deliver their maximum rated output, due to variable sunlight conditions, loss of efficiency as the panels age, reduced efficiency in extreme heat and so on. So you can actually get away with a smaller capacity inverter compared to the solar PV array (this is sometimes referred to as oversizing the array or overclocking the inverter).

An alternative to a single inverter unit is to have micro-inverters, where each panel has its own small inverter attached. These are usually more expensive, and have some technical pros and cons.

What about a battery?

A storage battery will capture the unused solar power generated during the day, for use at night and on low-sunlight days. Installations that include batteries are increasingly popular. See our case study of the first Australian home to install a Tesla PowerWall battery.

But for most homes, we think a battery doesn’t make economic sense yet. Batteries are still relatively expensive and the payback time will often be longer than the warranty period of the battery. However, it’s likely that battery technology and prices, together with future changes in how the electricity market works, will make batteries a good option for most homes within the next few years.

And remember: for most grid-connected systems, having a battery doesn’t necessarily protect you in the event of a blackout. You may still lose all power to your home, despite having solar panels producing power and a charged battery ready and waiting. This is because grid-connected systems have what’s known as "anti-islanding protection". During a blackout, the grid and any engineers working on the lines must be protected from "islands" of electricity generation (such as your solar panels) pumping power unexpectedly into the lines.

For most solar PV systems, the simplest way to provide anti-islanding protection is to shut down entirely. So, when it senses a grid blackout, your solar PV system shuts down and you have no household power at all.

More sophisticated inverters can provide anti-islanding protection during a blackout, but still keep the solar panels and battery operating so that the house has some power. But expect to pay a fair bit more for such a system, as the hardware is more expensive and you may need more solar and battery capacity than you think to run the house for a few hours during a blackout.

Terminology.

Watt (W) and kilowatt (kW) : a unit used to quantify the rate of energy transfer. One kilowatt = 1000 watts. With solar panels, the rating in watts specifies the maximum power the panel can deliver at any point in time.

Watt-hours (Wh) and kilowatt-hours (kWh) : a measure of energy production or consumption over time. The kilowatt-hour (kWh) is the unit you’ll see on your electricity bill, because you’re billed for your electricity use over time. A sunlight panel producing 300W for one hour would deliver 300Wh (or even 0.3kWh) of electricity.